Betekenis van:
breaker
breaker
Zelfstandig naamwoord
- soort golf
- waves breaking on the shore
Synoniemen
Hyperoniemen
breaker
Zelfstandig naamwoord
- omkrullende golven
- waves breaking on the shore
Synoniemen
Hyperoniemen
breaker
Zelfstandig naamwoord
- a device that trips like a switch and opens the circuit when overloaded
Synoniemen
Hyperoniemen
breaker
Zelfstandig naamwoord
- grondzee
- waves breaking on the shore
Synoniemen
Hyperoniemen
breaker
Zelfstandig naamwoord
- a quarry worker who splits off blocks of stone
Synoniemen
Hyperoniemen
Hyponiemen
Voorbeeldzinnen
- When the breaker tripped and it became pitch black, the baby got scared and started crying.
- I guess Ichiko is a fellow rule-breaker, she's sending me a smile filled with affection for a comrade.
- For two ply plus breaker construction of tube type tyres, localised damage to the breaker is permissible.
- Before running through system separation sections the traction unit’s main circuit breaker shall be opened.
- The thickness of original material above the breaker shall be ≥ 0,80 mm;
- Circuit breaker tripping in substations and on trains has to be coordinated.
- The thickness of original material above the breaker shall be ≥ 0,00 mm.
- It shall be assumed that the first ply encountered is a carcass ply unless a breaker can be positively identified. If a breaker is fitted, localised damage is permissible.
- It may also include renovation of the outermost sidewall surface and replacement of the crown plies or the protective breaker.
- For four ply, or more, construction of tubeless type tyres, there shall not be any damage to the carcass or breaker.
- They may, however, be protected by a common fuse or a common circuit-breaker, provided that its rated capacity does not exceed 16A.
- Electrical supply line: The line between the current collector or current source and the main circuit breaker or the main fuse(s) on the vehicle.
- provision shall be made in the energy subsystem to avoid bridging of both adjacent power supply systems should the opening of the on-board circuit breaker(s) fail,
- The thickness of original material above the breaker shall be ≥ 0,00 mm. The average thickness of new material above the buffed casing line shall be ≥ 2,00 mm.
- On leaving the separation section, the devices shall cause the main circuit breaker to be closed and power consumption to be resumed.