Betekenis van:
calibrate

to calibrate
Werkwoord
  • ijken, adjusteren
  • make fine adjustments or divide into marked intervals for optimal measuring
"calibrate an instrument"

Synoniemen

Hyperoniemen

to calibrate
Werkwoord
    • measure the caliber of
    "calibrate a gun"

    Hyperoniemen

    to calibrate
    Werkwoord
      • mark (the scale of a measuring instrument) so that it can be read in the desired units
      "he calibrated the thermometer for the Celsius scale"

      Hyperoniemen

      to calibrate
      Werkwoord
      • gradueren
      • make fine adjustments or divide into marked intervals for optimal measuring
      "calibrate an instrument"

      Synoniemen

      Hyperoniemen


      Voorbeeldzinnen

      1. This type of measurement can often be used to complement and calibrate simple engineering estimated data.
      2. Equipment to produce, align and calibrate land-based gravity meters with a static accuracy of better than 0,1 mgal.
      3. To this end it is recommended that Member State ensure that workshops authorised to install, activate, calibrate, inspect and repair recording equipment are approved, regularly controlled, certified and provided with timely, relevant updates and information.
      4. Before and after each set of measurements, a class 1 calibrator according to EN 60942:1998 shall be placed on the microphone in order to calibrate the measurement system.
      5. as a reference or standard to calibrate equipment which uses methyl bromide, to monitor methyl bromide emission levels or to determine methyl bromide residue levels in goods, plants and commodities;
      6. Sampling and analysis of all polluting substances including dioxins and furans as well as the quality assurance of automated measuring systems and the reference measurement methods to calibrate them shall be carried out according to CEN-standards.
      7. ADA_028 Adaptors to be installed in vehicles shall be delivered only to vehicle manufacturers, or to workshops approved by the competent authorities of the Member States and authorised to install, activate and calibrate digital tachographs.
      8. It is recommended that control officers check with their Card Issuing Authority [3] the status of such workshop cards that have been identified, and whether they were valid at the time they were used to calibrate the vehicle unit.
      9. Sampling and analysis of relevant polluting substances and measurements of process parameters as well as the quality assurance of automated measuring systems and the reference measurement methods to calibrate those systems shall be carried out in accordance with CEN standards.
      10. Calibrate the analyzer in the most common operating range following the manufacturer's specifications using zero and span gas (the NO content of which shall amount to about 80 per cent of the operating range and the NO2 concentration of the gas mixture shall be less than 5 per cent of the NO concentration).
      11. To this end it is recommended that Member State ensure that workshops authorised to install, activate, calibrate, inspect and repair recording equipment are approved, regularly controlled, certified and provided with timely, relevant updates and information. It is also recommended that Competent Authorities provide fitters and workshops with clear instructions and guidance about their duties and responsibilities, in particular their understanding of their role within the context of the overall security of the system.
      12. Equipment other than optical surface scattering measurement equipment, having an unobscured aperture of more than 10 cm, specially designed for the non-contact optical measurement of a non-planar optical surface figure (profile) to an "accuracy" of 2 nm or less (better) against the required profile. Note: 6B004 does not control microscopes. 6B007 Equipment to produce, align and calibrate land-based gravity meters with a static accuracy of better than 0,1 mgal. 6B008