Betekenis van:
coolant system

Voorbeeldzinnen

1. The principles of the construction and functioning of: internal combustion engines, fluids (e.g. engine oil, coolant, washer fluid), the fuel system, the electrical system, the ignition system, the transmission system (clutch, gearbox, etc.);
2. Rated speed: r/min2.1.9. Peak-torque speed: r/min2.1.10. Compression ratio (2):2.1.11. Combustion system description:2.1.12. Drawing(s) of combustion chamber and piston crown:2.1.13. Minimum cross-sectional area of inlet and outlet ports:2.1.14. Cooling system2.1.14.1. Coolant2.1.14.1.1. Nature of coolant:2.1.14.1.2. Circulating pump(s): yes/no (1)2.1.14.1.3. Characteristics or make(s) and type(s) (if applicable):2.1.14.1.4. Drive ratio(s) (if applicable):2.1.14.2. Air2.1.14.2.1. Blower: yes/no (1)2.1.14.2.2. Characteristics or make(s) and type(s) (if applicable):2.1.14.2.3. Drive ratio(s) (if applicable):2.1.15. Temperature permitted by the manufacturer:2.1.15.1. Liquid cooling: maximum temperature at outlet: K2.1.15.2. Air cooling: reference point:Maximum temperature at reference point: K2.1.15.3. Maximum charge air temperature at the intercooler outlet (if applicable): K2.1.15.4. Maximum exhaust temperature at the point in the exhaust pipe(s) adjacent to the outer flange(s) of the exhaust manifold(s): K2.1.15.5. Lubricant temperature: minimum: K maximum: K2.1.16. Pressure charger: yes/no (1)2.1.16.1. Make:2.1.16.2. Type:2.1.16.3. Description of the system (e.g. maximum charge pressure, waste-gate, if applicable):2.1.16.4. Intercooler: yes/no (1)2.1.17. Intake system: maximum allowable intake depression at rated engine speed and at 100 % load: kPa2.1.18. Exhaust system: maximum permissible exhaust back pressure at rated engine speed and at 100 % load: kPa
3. Position, size and numbering:3.2.6. Electronic control functionsIf the engine features electronically controlled functions, the information concerning their performance must be provided including:3.2.6.1. Make:3.2.6.2. Type:3.2.6.3. Part number:3.2.6.4. Location of engine electronic control unit:3.2.6.4.1. What does it sense:3.2.6.4.2. What does it control:Part 3 — Compression-ignition engine family3.3. Essential characteristics of the engine family3.3.1. List of engine types within a family3.3.1.1. Name of engine family:3.3.1.2. Specification of engine types within this family:Parent engineEngine typeNumber of cylindersRated speed (r/min)Fuel delivery per stroke (mm3) at rated speedRated net power (kW)Maximum torque speed (r/min)Fuel delivery per stroke (mm3) at maximum torque speedMaximum torque (Nm)Low idle speed (r/min)Cylinder swept volume as % of parent engine100 Part 4 — Engine type3.4. Essential characteristics of the engine type3.4.1. Description of the engine3.4.1.1. Manufacturer:3.4.1.2. Manufacturer’s engine code as affixed to engines:3.4.1.3. Cycle: four stroke/two stroke (1)3.4.1.4. Bore: mm3.4.1.5. Stroke: mm3.4.1.6. Number and arrangement of cylinders:3.4.1.7. Swept volume: cm33.4.1.8. Rated speed: r/min3.4.1.9. Peak torque speed: r/min3.4.1.10. Compression ratio (2):3.4.1.11. Combustion system:3.4.1.12. Drawing(s) of combustion chamber and piston crown:3.4.1.13. Minimum cross sectional area of inlet and outlet ports:3.4.1.14. Cooling system3.4.1.14.1. Coolant3.4.1.14.1.1. Nature of coolant:3.4.1.14.1.2. Circulating pump(s): yes/no (1)3.4.1.14.1.3. Characteristics or make(s) and type(s) (if applicable):3.4.1.14.1.4. Drive ratio(s) (if applicable):3.4.1.14.2. Air3.4.1.14.2.1. Blower: yes/no (1)3.4.1.14.2.2. Characteristics or make(s) and type(s) (if applicable):3.4.1.14.2.3. Drive ratio(s) (if applicable):3.4.1.15. Temperature permitted by the manufacturer:3.4.1.15.1.