Betekenis van:
electrical resistance

electrical resistance
Zelfstandig naamwoord
  • impedantie
  • a material's opposition to the flow of electric current; measured in ohms

Synoniemen

Hyperoniemen

Hyponiemen


Voorbeeldzinnen

  1. (electrical resistance)
  2. The minimum electrical resistance required is 3 Ωkm.
  3. the actual electrical resistance provided by the fastening system (section 5.3.2 requires a minimum electrical resistance of 5 kΩ. However, a higher electrical resistance may be required to ensure compatibility with the chosen control command and signalling system).
  4. The electrical resistance between the metallic parts and the rail shall not exceed 0,15 ohm.
  5. Fully or partly automatic electrical machines for resistance welding of metal
  6. When connected, this change of resistance produces a change of electrical current, which is transmitted to the engine management system.
  7. The electrical resistance between the metallic parts and the rail shall not exceed 0,15 ohm for freight wagons.
  8. The requirements related to electrical resistance of wheelsets linked to control-command and signalling subsystem are specified in clause 4.2.3.3.1.
  9. "Superconductive" (1 3 6 8) means materials, i.e., metals, alloys or compounds, which can lose all electrical resistance, i.e., which can attain infinite electrical conductivity and carry very large electrical currents without Joule heating.
  10. the minimum electrical resistance required is 5 kΩ, measured in accordance with EN 13146-5. It is permissible for the Infrastructure Manager to require a higher resistance where this is required by particular control command and signalling systems;
  11. Electrical industrial/laboratory furnaces/ovens, induction/dielectric heating equipment including dielectric furnaces/ovens excluding infra-red radiation ovens, resistance heated furnaces/ovens
  12. The electrical resistance of each wheelset measured across the treads of the two wheels shall not exceed 0,01 ohm for new or reassembled wheelsets incorporating new components.
  13. Graphite electrodes and nipples used for such electrodes covered by this investigation are only those with an apparent density of 1,65 g/cm3 or more and an electrical resistance of 6,0 μΩ.m or less.
  14. Clause 4.2.3.3.2.3 of this TSI details the specifications concerning the rolling stock related to parameters, which influence ground based train monitoring systems, and particularly electrical resistance of the wheelsets and axle bearing health monitoring.
  15. To ensure the operation of track circuits, the electrical resistance of each wheelset, measured from tyre to tyre shall meet the requirements of clause 3.5 of Annex A Appendix 1 of the Control-Command and Signalling TSI:2006.