Betekenis van:
fuel injection system

fuel injection system
Zelfstandig naamwoord
    • mechanical system to inject atomized fuel directly into the cylinders of an internal-combustion engine; avoids the need for a carburetor

    Synoniemen

    Hyperoniemen


    Voorbeeldzinnen

    1. Feed system (pump, injection into intake, mixing with fuel, etc.):
    2. the fuel-injection system electronic, fuel quantity and timing actuator(s) for circuit continuity (i.e. open circuit or short circuit) and total functional failure.
    3. The fuel temperature shall be measured at the inlet to the carburettor or at the fuel injection system and maintained within the limits established by the engine manufacturer.
    4. The fuel-injection system electronic fuel quantity and timing actuator(s) is/are monitored for circuit continuity and total functional failure;
    5. Line costs (including checking of the electrical system, the avionics and the landing gear and inspection of the fuel injection system)
    6. .16 Existing class B ships shall comply with the requirements of paragraphs .2.9 to .2.11, except that a suitable enclosure of engines having an output of 375 kW or less having fuel injection pumps serving more than one injector may be used as an alternative to the jacketed piping system in paragraph .2.9.
    7. Lubricant temperature: minimum: K maximum: K4.1.16. Pressure charger: yes/no (1)4.1.16.1. Make:4.1.16.2. Type:4.1.16.3. Description of the system (e.g. maximum charge pressure, waste-gate, if applicable):4.1.16.4. Intercooler: yes/no (1)4.1.17. Intake system: maximum allowable intake depression at rated engine speed and at 100 % load: kPa4.1.18. Exhaust system: maximum permissible exhaust back pressure at rated engine speed and at 100 % load: kPa4.2. Additional anti-pollution devices (if any, and if not covered by another heading)Description and/or (1) diagram(s):4.3. Fuel feed4.3.1. Feed pumpPressure (2) or characteristic diagram: kPa4.3.2. Injection system4.3.2.1. Pump4.3.2.1.1. Make(s):4.3.2.1.2. Type(s):4.3.2.1.3. Delivery: mm3 (2) per stroke or cycle at pump speed of: r/min (rated)and r/min (maximum torque) respectively, or characteristic diagramState which method used: on engine/on pump bench (1)4.3.2.1.4. Injection advance4.3.2.1.4.1. Injection advance curve (2):4.3.2.1.4.2. Timing (2):4.3.2.2. Injection piping4.3.2.2.1. Length: mm4.3.2.2.2. Internal diameter: mm4.3.2.3. Injector(s)4.3.2.3.1. Make(s):4.3.2.3.2. Type(s):4.3.2.3.3. Opening pressure (2) or characteristic diagram (1):4.3.2.4. Governor(s)