Betekenis van:
graduated cylinder

Voorbeeldzinnen

1. increase in volume within graduated cylinder during test.
2. Pour the contents of the cylinder through moistened glass wool, allowing the water to drain into a second 100 ml graduated cylinder.
3. The open end of this outlet tube is to be located within an inverted graduated cylinder which is calibrated in cubic centimetres.
4. the end of the outlet tube is located approximately 13 mm above the water level within the inverted graduated cylinder, and
5. During this time, the vertical position of the graduated cylinder is to be adjusted, if necessary, to maintain the same water level within and exterior to it.
6. Place 5 g to agar in a 100 ml graduated cylinder, fill to the mark with water, mix and allow to stand at about 25 oC for 24 hours.
7. With the valve in the closed position assumed as the result of normal operation, air or nitrogen at the specified test pressure is to be applied to the valve inlet for a test period of not less than 2 minutes. During this time, the vertical position of the graduated cylinder is to be adjusted, if necessary, to maintain the same water level within and exterior to it.