Betekenis van:
indicator lamp

indicator lamp
Zelfstandig naamwoord
  • controlelampje
  • indicator consisting of a light to indicate whether power is on or a motor is in operation

Synoniemen

Hyperoniemen


Voorbeeldzinnen

  1. Direction-indicator lamp
  2. direction indicator lamp: amber,
  3. DIRECTION-INDICATOR LAMP (Regulation No 6)
  4. ‘Direction-indicator lamp’ means the lamp used to indicate to other road-users that the driver intends to change direction to the right or to the left.
  5. A direction-indicator lamp or lamps may also be used according to the provisions of Regulation No 97;
  6. In the case of a direction indicator lamp, it shall be lit in flashing mode with an on/off time of approximately one to one.
  7. The cornering lamp shall be switched OFF automatically when the direction indicator is switched OFF and/or the steering angle has returned in the straight-ahead position.
  8. A front direction indicator lamp of category 1a approved in accordance with the 01 series of amendments to Regulation No 6. Installation unit 3
  9. A front direction indicator lamp of category 1a approved in accordance with the 01 series of amendments to Regulation No 6.
  10. Indicator lamp, consisting of 4 light-emitting diodes made from silicon-cardide (SiC) semiconductor material, operating at a nominal wavelength of 481, 560 or 630 nm, contained in a housing
  11. The system bearing the above approval marks meets the requirements of this Regulation (00 series of amendments) in respect of both a passing beam for left-hand traffic and a driving beam with a maximum intensity comprised between 86250 and 101250 candelas (as indicated by the number 30) grouped with a front direction indicator lamp of category 1a, approved in accordance with the 01 series of amendments of Regulation No 6 and a front position lamp approved in accordance with the 02 series of amendments of Regulation No 7.
  12. in the case where a test sample provides more than one function or class of passing beam according to this Regulation: if the applicant declares that each specified function or class of passing beam of the test sample has its own light source(s), being exclusively lit [2] at a time, the test shall be carried out in accordance with this condition, activating [1] When the ‘test sample’ is grouped and/or reciprocally incorporated with signalling lamps, the latter shall be lit for the duration of the test. In the case of a direction indicator lamp, it shall be lit in flashing operation mode with an on/off time ratio of approximately one to one.