Betekenis van:
input signal

input signal
Zelfstandig naamwoord
    • signal going into an electronic system

    Synoniemen

    Hyperoniemen


    Voorbeeldzinnen

    1. When the input exceeds a certain threshold, an output signal is instantaneously released.
    2. Step input signal
    3. Step input signal Si
    4. three video input connectors (composite video signal),
    5. The Bessel filter response time tF is defined as the rise time of the filtered output signal between 10 % and 90 % on a step input signal.
    6. In figure (a), the traces of a step input signal and Bessel filtered output signal as well as the response time of the Bessel filter (tF) are shown.
    7. In figure a, the traces of a step input signal and Bessel filtered output signal as well as the response time of the Bessel filter (tF) are shown.
    8. where Si represents the values of the step input signal (either ‘0’ or ‘1’) and Yi represents the filtered values of the output signal. Step 3 Application of Bessel filter on step input:
    9. Manufacturers shall ignore the input sync signal check cycle when metering the model in Sleep Mode/Low Power.
    10. the second click on an input device which requires a double click as a specific signal is acceptable,
    11. By definition, the filter response time tF is the rise time of a filtered output signal between 10 per cent and 90 per cent on a step input signal.
    12. The Bessel filter response time tF is defined as the rise time of the filtered output signal between 10 per cent and 90 per cent on a step input signal.
    13. ‘Signal’ means any AFS control signal as defined in Regulation No 48 or, any additional control input to the system or, a control output from the system to the vehicle;
    14. ‘AFS control signal’ (V, E, W, T) means the input to the AFS in accordance with the paragraph 6.22.7.4. of this Regulation;
    15. For determining the times of 10 % (t10) and 90 % (t90) of the output signal, a Bessel filter has to be applied to a step input using the above values of fc, E and K. The index numbers, the time and the values of a step input signal and the resulting values of the filtered output signal for the first and the second iteration are shown in Table B. The points adjacent to t10 and t90 are marked in bold numbers.