Betekenis van:
intake manifold

intake manifold
Zelfstandig naamwoord
    • a manifold consisting of a pipe to carry fuel to each cylinder in an internal-combustion engine

    Hyperoniemen


    Voorbeeldzinnen

    1. Intake manifold
    2. Intake manifold: … Description:
    3. Induction heating device of intake manifold
    4. Working principle: intake manifold (single/multi-point)/direct injection/other (specify)
    5. Working principle: Intake manifold (single-/multi-point [2] Delete as applicable. )/direct injection/other (specify) [2] Delete as applicable.
    6. Measuring instruments for fuel consumption, air consumption, temperature of coolant and lubricant, exhaust gas pressure and intake manifold depression, exhaust gas temperature, air intake temperature, atmospheric pressure, humidity and fuel temperature must be used, as required.
    7. Measuring instruments for fuel consumption, air consumption, temperature of coolant and lubricant, exhaust gas pressure and intake manifold depression, exhaust gas temperature, air intake temperature, atmospheric pressure, humidity and fuel temperature shall be used, as required.
    8. Stored engine conditions must include, but are not limited to calculated load value, engine speed, coolant temperature, intake manifold pressure (if available), and the fault code which caused the data to be stored.
    9. Working principle: intake manifold (single-/multi-point/direct injection [6] Delete where not applicable (there are cases where nothing needs to be deleted when more than one entry is applicable).
    10. Stored engine conditions shall include, but are not limited to calculated load value, engine speed, coolant temperature, intake manifold pressure (if available), and the fault code which caused the data to be stored.
    11. Measuring instruments for fuel consumption, air consumption, temperature of coolant and lubricant, exhaust gas pressure and intake manifold depression, exhaust gas temperature, air intake temperature, atmospheric pressure, humidity and fuel temperature must be used, as required. These instruments must satisfy the requirements given in table 8:
    12. Rated speed: r/min2.1.9. Peak-torque speed: r/min2.1.10. Compression ratio (2):2.1.11. Combustion system description:2.1.12. Drawing(s) of combustion chamber and piston crown:2.1.13. Minimum cross-sectional area of inlet and outlet ports:2.1.14. Cooling system2.1.14.1. Coolant2.1.14.1.1. Nature of coolant:2.1.14.1.2. Circulating pump(s): yes/no (1)2.1.14.1.3. Characteristics or make(s) and type(s) (if applicable):2.1.14.1.4. Drive ratio(s) (if applicable):2.1.14.2. Air2.1.14.2.1. Blower: yes/no (1)2.1.14.2.2. Characteristics or make(s) and type(s) (if applicable):2.1.14.2.3. Drive ratio(s) (if applicable):2.1.15. Temperature permitted by the manufacturer:2.1.15.1. Liquid cooling: maximum temperature at outlet: K2.1.15.2. Air cooling: reference point:Maximum temperature at reference point: K2.1.15.3. Maximum charge air temperature at the intercooler outlet (if applicable): K2.1.15.4. Maximum exhaust temperature at the point in the exhaust pipe(s) adjacent to the outer flange(s) of the exhaust manifold(s): K2.1.15.5. Lubricant temperature: minimum: K maximum: K2.1.16. Pressure charger: yes/no (1)2.1.16.1. Make:2.1.16.2. Type:2.1.16.3. Description of the system (e.g. maximum charge pressure, waste-gate, if applicable):2.1.16.4. Intercooler: yes/no (1)2.1.17. Intake system: maximum allowable intake depression at rated engine speed and at 100 % load: kPa2.1.18. Exhaust system: maximum permissible exhaust back pressure at rated engine speed and at 100 % load: kPa