Betekenis van:
longitudinally

Voorbeeldzinnen

1. Longitudinally reinforced array hoses;
2. 1 (b) Longitudinally
3. Version B1: Point of impact of ROPS behind longitudinally unstable equilibrium point
4. Line pipe, of a kind used for oil or gas pipelines, longitudinally or spirally welded, of an external diameter ≤ 406,4 mm, of stainless steel
5. Line pipe, of a kind used for oil or gas pipelines, longitudinally welded, of an external diameter > 406,4 mm, of steel
6. Line pipe, of a kind used for oil or gas pipelines, longitudinally or spirally welded, of an external diameter ≤ 406,4 mm, of steel other than stainless steel
7. Line pipe, of a kind used for oil or gas pipelines, other than longitudinally welded, of an external diameter > 406,4 mm, of steel
8. Line pipe, of a kind used for oil or gas pipelines, other than longitudinally welded, of an external diameter > 406,4 mm, of steel
9. where the driver position ‘R-point’ is either forward of the front axle or longitudinally rearwards of the front axle transverse centreline by a maximum of 1100 mm.
10. Line pipe, of a kind used for oil or gas pipelines, longitudinally or spirally welded, of an external diameter ≥ 406,4 mm, of steel other than stainless steel
11. The cables shall then be routed to the associated equipment, which shall be sited in an area outside the influence of the electromagnetic field, e.g. on the floor of the screened room 1 m longitudinally away from the stripline.
12. Sample application: After pre-focusing (step 1), pipette 18 μl of the sample and standard solutions onto the sample applicators (10 × 5 mm), place them on the gel at 1 mm intervals from each other and 5 mm longitudinally from the anode and press lightly.
13. The clearance zone for tractors with a non-reversible seat is defined in 1.6.2.1 to1.6.2.11 below and is bounded by the following planes, the tractor being on a horizontal surface, the seat, where adjustable, adjusted to its rear uppermost position, and the steering wheel, where adjustable, adjusted to the mid-position for seated driving: 1.6.2.1 two vertical planes 250 mm on either side of the reference plane, these vertical planes extending 300 mm upwards from the plane defined in 1.6.2.8 below and longitudinally at least 550 mm in front of the vertical plane perpendicular to the reference plane passing (210 – ah) mm in front of the seat index point;