Betekenis van:
motor control

Voorbeeldzinnen

1. the electronic converters (on-board charger, electronic control of the traction motor, DC/DC converter, etc.);
2. State technician for the control of motor vehicle roadworthiness (kontrolní technik STK),
3. with or without printed circuit board mounted drive control integrated circuit, motor driver integrated circuit and memory,
4. ‘Variable Speed Drive’ means an electronic power converter that continuously adapts the electrical power supplied to the electric motor in order to control the mechanical power output of the motor according to the torque-speed characteristic of the load (being driven by the motor), by adjusting the three-phase 50 Hz power supply to a variable frequency and voltage supplied to the motor.
5. diagnostician executing motor vehicle roadworthiness tests at a district vehicle control station (diagnosta przeprowadzający badania techniczne pojazdu w okręgowej stacji kontroli pojazdów),
6. It is necessary that further improvements be made to the quality of motor fuels to enable the efficient and durable performance of emission control systems in service.
7. diagnostician executing motor vehicle roadworthiness tests at a vehicle control station at basic level (diagnosta przeprowadzający badania techniczne w stacji kontroli pojazdów o podstawowym zakresie badań),
8. Air control valve, consisting of a stepping motor and a valve pintle, for the regulation of idle air flow in fuel injection engines
9. This annex describes the provisions specific to the on-board diagnostic (OBD) system for the emission control systems of motor vehicles.
10. Except as provided in paragraph 6.23.9.2. below, if a motor vehicle is equipped to tow a trailer, the control of the emergency stop signal on the motor vehicle shall also be capable of operating the emergency stop signal on the trailer.
11. DC motor, brushless, with a three-phase winding, an external diameter of 85 mm or more, but not more than 115 mm, a nominal torque of 2.23 Nm (±1,0 Nm), of an output of more than 120 W but not more than 520 W, calculated with 1550 RPM (± 350 RPM) at a supply voltage of 12 V equipped with electronic circuit with sensors using the Hall effect, for use with an electric power steering control module (power steering motor) [1]
12. Unmounted or incomplete assembly, comprising at least one optical unit and DC motors and operational control circuit, with digital/analogue converter, for use in the manufacture of CD players, radio-broadcast receivers of a kind used in motor vehicles or navigational aid apparatus [1]
13. ex85229080[2] te assembly, comprising at least one optical unit and DC motors and operational control circuit, with digital/analogue converter, for use in the manufacture of CD players, radio-broadcast receivers of a kind used in motor vehicles or navigational aid apparatus [1]
14. Tungsten, molybdenum and alloys of these metals in the form of uniform spherical or atomized particles of 500 micrometre diameter or less with a purity of 97 % or greater for fabrication of "missile" motor components, i.e., heat shields, nozzle substrates, nozzle throats and thrust vector control surfaces.
15. This Directive applies to the control of gaseous and particulate pollutants, useful life of emission control devices, conformity of in-service vehicles/engines and on-board diagnostic (OBD) systems of all motor vehicles equipped with compression-ignition engines and to the gaseous pollutants, useful life, conformity of in-service vehicles/engines and on-board diagnostic (OBD) systems of all motor vehicles equipped with positive-ignition engines fuelled with natural gas or LPG, and to compression-ignition and positive-ignition engines as specified in Article 1 with the exception of compression-ignition engines of those vehicles of category N1, N2 and M2 and of positive-ignition engines fuelled with natural gas or LPG of those vehicles of category N1 for which type-approval has been granted under Council Directive 70/220/EEC.(b) In section 2, the title and sections 2.1 to 2.32.1 are replaced by the following: