Betekenis van:
plane section

Voorbeeldzinnen

1. Cross-section through the reference plane
2. Section C Trace of vertical median plane of seat
3. Section A-A of the vehicle in the vertical plane of the centre-line of the inboard seats.
4. The plane S1, perpendicular to the reference line and situated 65 mm below the tangent S defined in paragraph 6.5.3, determines a section in the head restraint bounded by the outline C.
5. The appropriate proportion of the energy prescribed in Sub-appendix 1 to this appendix shall be applied to the bodywork section by the pendulum such that at the moment of impact the direction of motion of the pendulum makes an angle of 25 degrees (+ 0o, - 5o) to the central longitudinal vertical plane of the bodywork section.
6. This free space shall permit the free passage of a vertical panel whose form and dimensions are the same as the cylindrical form (paragraph 7.7.5.1.), central section and a thickness of no more than 20 mm. This panel shall be moved, from the cylindrical form tangential position, until its external side is in contact with the dual panel interior side, touching the plane or planes defined by the step upper edges, in the probable direction of motion of a person using the entrance (see Annex 4, Figure 2).
7. the hand brake control when in the released position and the gear lever when in any forward gear position, have, except when placed in the zones defined in paragraphs 2.3.1 and 2.3.2 and in the zones below the horizontal plane passing through the ‘H’ point of the front seats, a surface area of not less than 6 cm2 measured at a cross-section normal to the longitudinal horizontal direction up to a distance of 6,5 mm from the part projecting furthest, the radius of curvature being not less than 3,2 mm. (see Annex X, explanatory notes, paragraph 5.3.2.3)