Betekenis van:
projecting

Werkwoord

Voorbeeldzinnen

1. Sharp edges and projecting parts
2. Mechanical appliances for projecting, dispersing or spraying
3. Steam or sandblasting machines and similar jet projecting machines:
4. CPA 28.30.60: Machinery for projecting, dispersing or spraying liquids or powders for agriculture or horticulture
5. Mechanical appliances (whether or not hand-operated) for projecting, dispersing or spraying liquids or powders; fire extinguishers, whether or not charged; spray guns and similar appliances; steam or sandblasting machines and similar jet projecting machines
6. Classification under heading 8424 is excluded as the device is not a mechanical appliance for projecting, dispersing or spraying liquids.
7. Steam or sand blasting machines and similar jet-projecting machines (excluding fire extinguishers, spray guns and similar appliances)
8. Length overall and breadth overall give the maximum dimensions of the craft, including all projecting fixed parts.
9. Steam or sandblasting machines and similar jet-projecting machines (excluding fire extinguishers, spray guns and similar appliances)
10. Parts for mechanical appliances for projecting, dispersing or spraying liquids/powders; fire-extinguishers, spray guns and similar appliances and steam/sandblasting machines
11. ’Disruptors’ are devices specially designed for the purpose of preventing the operation of an explosive device by projecting a liquid, solid or frangible projectile.
12. prudent recovery rates (including the costs of winding-up and recovery) were projected, reflecting the latest trends and not projecting any improvement in the coming years,
13. The furthest projecting part, in the case of a gear lever, is that part of the grip or knob first contacted by a vertical transverse plane moved in a longitudinal, horizontal direction.
14. TIP should be used to enhance the performance of screeners, examining both cabin bags and hold bags, by means of projecting virtual images of threat articles into an x-ray image of a bag.
15. Components mounted on the roof but which are not part of the roof structure, such as grab handles, lamps and sun visors, etc. shall have a radius of curvature not less that 3,2 mm. In addition, the width of the projecting parts shall not be less than the amount of their downward projection; alternatively, these projecting parts shall pass the energy-dissipating test in accordance with the requirements of Annex IV. (see Annex X, explanatory notes, paragraph 5.3.4.1)