Betekenis van:
road surface

Voorbeeldzinnen

1. Tires wear down because of friction between the rubber and the road surface.
2. The joke about the chicken crossing the road to get to the other side is an example of "anti-humor": meant to be funny because, on the surface, it is not.
3. Road-surface painting work
4. information on the road such as area type, road type, junction type incl. signalling, number of lanes, markings, road surface, lighting and weather conditions, speed limit, roadside obstacles;
5. The road must be level and must have a surface affording good adhesion;
6. Wind velocity shall be measured 0,7 m above the road surface.
7. certificates of approval for crew wagons and tankers with or without road surface coating equipment are not required.
8. The presented method contains specifications on measuring instruments, measurement conditions and the measurement method, in order to obtain the sound level of a set of tyres mounted on a test vehicle rolling on a specified road surface.
9. older tankers, not fulfilling the requirements in 6.7 or 6.8, intended for the transport of substances of UN 1268, 1999, 3256 and 3257, with or without road surface coating equipment, may still be used for local transport and in close proximity to road work places;
10. older tankers, not fulfilling the requirements in 6.7 or 6.8, intended for the transport of substances of UN 1268, 1999, 3256 and 3257, with or without road surface coating equipment, may still be used for local transport and in close proximity to road workplaces;
11. ‘Steering angle’ means the angle between the projection of a longitudinal axis of the vehicle and the line of intersection of the wheel plane (being the central plane of the wheel, normal to the axis around which it rotates) and the road surface.
12. While it is true that the main purpose of a channel grating is to drain the surface from excessive water so that vehicles or planes can safely use the road/runway, this does not exclude that channel gratings also serve the purpose of covering an underground chamber, as stated above, and they also must bear load resistance of vehicles.
13. For road transport purposes, these facilities are used as one-sided platforms. Such use makes them insufficiently productive (more surface area than a classic two-sided facility, consequently more distance covered by parcels on the platform, consequently more handlers to move them around and more risk of damage to parcels).
14. ‘Technically permissible maximum mass on the axle (m)’ means the mass corresponding to the maximum permissible static vertical load exerted by the axle on the road surface, based on the construction of the vehicle and of the axle and as stated by the vehicle manufacturer.