Betekenis van:
thermoplastic

thermoplastic
Bijvoeglijk naamwoord
  • thermoplastisch
  • having the property of softening or fusing when heated and of hardening and becoming rigid again when cooled
"thermoplastic materials can be remelted and cooled time after time without undergoing any appreciable chemical change"

Hyperoniemen

thermoplastic
Zelfstandig naamwoord
  • thermoplast
  • a material that softens when heated and hardens again when cooled

Synoniemen

Hyperoniemen

Hyponiemen


Voorbeeldzinnen

  1. Tensile strength and elongation for rubber material and for thermoplastic elastomers (TPE)
  2. Styrene-butadiene-styrene block copolymers produced by solution polymerisation (SBS, thermoplastic elastomers), in granules, crumbs or powders
  3. Manufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralised with metal ions, mainly zinc and sodium
  4. Thermoplastic elastomer, with an A-B-A block copolymer structure of polystyrene, polyisobutylene and polystyrene containing by weight 10 % or more but not more than 35 % of polystyrene
  5. Heading 3915 does not apply to waste, parings and scrap of a single thermoplastic material, transformed into primary forms (headings 3901 to 3914).
  6. Thermoplastic polyurethane film, of a thickness of 250 μm or more but not more than 350 μm, covered on one side with a removable protective film
  7. Manufacture from a thermoplastic partial salt which is a copolymer of ethylene and metacrylic acid partly neutralised with metal ions, mainly zinc and sodium
  8. Electrical machines and apparatus for welding thermoplastic materials (excl. wire bonders of a kind used for the manufacture of semiconductor devices)
  9. Thermoplastic polyamide resin having a fire point of more than 750 °C, for use in the manufacture of deflection yokes of cathode ray tubes [1]
  10. Thermoplastic polyamide resin having a fire point of more than 750 oC, for use in the manufacture of deflection yokes of cathode ray tubes [1]
  11. Thermoplastic liquid crystal copolymers having a heat distortion temperature exceeding 523 K (250 °C) measured according to ISO 75-2 (2004), method A or national equivalents, with a load of 1,80 N/mm2 and composed of:
  12. N.B.: See also "aircraft". "Commingled" (1) means filament to filament blending of thermoplastic fibres and reinforcement fibres in order to produce a fibre reinforcement "matrix" mix in total fibre form.
  13. Thermoplastic liquid crystal copolymers having a heat distortion temperature exceeding 523 K (250 °C) measured according to ASTM D-648, method A, or national equivalents, with a load of 1,82 N/mm2 and composed of:
  14. The major uses of 1,3-butadiene are in the manufacture of synthetic rubber such as styrene-butadiene rubber (SBR) and polybutadiene rubber, thermoplastic resins such as acrylonitrile-butadiene-styrene (ABS), and styrene-butadiene latex.
  15. Laminated sheet or strip, consisting of a film composed of a blend of a thermoplastic elastomer (TPE) of styrene-butadiene-styrene (SBS) with polyethylene or polypropylene, of a thickness of 100 μm or more but not exceeding 200 μm, coated or covered on both sides with a film of polypropylene of a thickness not exceeding 20 μm