Betekenis van:
tibia

tibia
Zelfstandig naamwoord
    • the inner and thicker of the two bones of the human leg between the knee and ankle

    Synoniemen

    Hyperoniemen


    Voorbeeldzinnen

    1. Descongelar las partes heladas con agua tibia.
    2. Remove shank bones (tibia and hock). Trimming: trim sinew tips back to the meat.
    3. The impactor must be instrumented to measure the bending angle and the shearing displacement between femur and tibia.
    4. The centre of gravity of the femur and tibia shall be 217 ± 10 mm and 233 ± 10 mm from the centre of the knee respectively.
    5. The lower legform impactor must consist of two foam covered rigid segments, representing femur (upper leg) and tibia (lower leg), joined by a deformable, simulated knee joint.
    6. The length of the femur and tibia shall be 432 mm and 494 mm from the centre of the knee respectively.
    7. ‘turkey drumsticks’, for the purposes of subheadings 02072660 and 02072760: turkey cuts, consisting of the tibia and fibula together with the surrounding musculature.
    8. The centre of gravity of the femur and tibia must be 217 ± 10 mm and 233 ± 10 mm from the centre of the knee respectively.
    9. One uni-axial accelerometer must be fitted to the non-impacted side of the tibia, close to the knee joint, with its sensitive axis in the impact direction.
    10. The length of the femur and tibia must be 432 mm and 494 mm from the centre of the knee respectively.
    11. The moment of inertia of the femur and tibia, about a horizontal axis through the respective centre of gravity and perpendicular to the direction of impact, must be 0,127 ± 0,010 kgm2 and 0,120 ± 0,010 kgm2 respectively.
    12. ‘turkey legs, other than drumsticks’, for the purposes of subheadings 02072670 and 02072770: turkey cuts, consisting of the femur together with the surrounding musculature or of the femur, tibia and fibula, together with the surrounding musculature.
    13. The moment of inertia of the femur and tibia, about a horizontal axis through the respective centre of gravity and perpendicular to the direction of impact, shall be 0,127 ± 0,010 kgm2 and 0,120 ± 0,010 kgm2 respectively.
    14. The total mass of the femur and tibia must be 8,6 ± 0,1 kg and 4,8 ± 0,1 kg respectively, and the total mass of the impactor must be 13,4 ± 0,2 kg.
    15. Cutting and boning: remove by a cut passing through the stifle joint and separating from the topside and the silverside by following the natural seam, leaving the heel muscle attached to the shank. Remove shank bones (tibia and hock).