Betekenis van:
two-piece
two-piece
Bijvoeglijk naamwoord
- uit twee delen
- (of clothing) made in or consisting of two parts or pieces
"a two-piece swimsuit"
two-piece
Zelfstandig naamwoord
- twee bij elkaar passende kledingstukken
- a business suit consisting of a matching jacket and skirt or trousers
Synoniemen
Hyperoniemen
two-piece
Zelfstandig naamwoord
- tweedelig badpak
- a woman's very brief bathing suit
Synoniemen
Hyperoniemen
Werkwoord
Voorbeeldzinnen
- The extension piece is an untapered section normally manufactured of either one or two pieces of nets.
- "Diffusion bonding" (1 2 9) means a solid state molecular joining of at least two separate metals into a single piece with a joint strength equivalent to that of the weakest material.
- "Diffusion bonding" (1 2 9) means a solid state molecular joining of at least two separate metals into a single piece with a joint strength equivalent to that of the weakest material. "Digital computer" (4 5) means equipment which can, in the form of one or more discrete variables, perform all of the following: a. Accept data;
- In the case of a square mesh cod-end, in particular, the circumference of the rearmost part of the trawl body or of the extension piece shall be from two to four times the circumference of the front end of the cod-end sensu stricto.
- Second, Romania argues that, although AVAS intended to sell the two functional modules separately, the independent liquidator, CIT, recommended after an initial assessment the sale of the entire industrial platform as a whole, as it would be more advantageous than a piece-by-piece sale, in particular since the industrial platform contains also some unattractive assets (i.e. plots of land which do not have access to any local infrastructure and/or are located near the city waste dump, the buildings are outdated etc.), which could probably not be sold individually.
- "Development" (GTN NTN All) is related to all phases prior to serial production, such as: design, design research, design analyses, design concepts, assembly and testing of prototypes, pilot production schemes, design data, process of transforming design data into a product, configuration design, integration design, layouts. "Diffusion bonding" (1 2 9) means a solid state molecular joining of at least two separate metals into a single piece with a joint strength equivalent to that of the weakest material. "Digital computer" (4 5) means equipment which can, in the form of one or more discrete variables, perform all of the following:
- Multiple optical reflecting elements that can be individually and dynamically repositioned by the application of torques or forces to compensate for distortions in the optical waveform incident upon the mirror. "Depleted uranium" (0) means uranium depleted in the isotope 235 below that occurring in nature. "Development" (GTN NTN All) is related to all phases prior to serial production, such as: design, design research, design analyses, design concepts, assembly and testing of prototypes, pilot production schemes, design data, process of transforming design data into a product, configuration design, integration design, layouts. "Diffusion bonding" (1 2 9) means a solid state molecular joining of at least two separate metals into a single piece with a joint strength equivalent to that of the weakest material. "Digital computer" (4 5) means equipment which can, in the form of one or more discrete variables, perform all of the following: a. Accept data; b. Store data or instructions in fixed or alterable (writable) storage devices;
- multiple optical reflecting elements that can be individually and dynamically repositioned by the application of torques or forces to compensate for distortions in the optical waveform incident upon the mirror. "Depleted uranium" (0) means uranium depleted in the isotope 235 below that occurring in nature. "Development" (GTN NTN All) is related to all phases prior to serial production, such as: design, design research, design analyses, design concepts, assembly and testing of prototypes, pilot production schemes, design data, process of transforming design data into a product, configuration design, integration design, layouts. "Diffusion bonding" (1 2 9) means a solid state molecular joining of at least two separate metals into a single piece with a joint strength equivalent to that of the weakest material. "Digital computer" (4 5) means equipment which can, in the form of one or more discrete variables, perform all of the following: a. accept data; b. store data or instructions in fixed or alterable (writable) storage devices;
- Multiple optical reflecting elements that can be individually and dynamically repositioned by the application of torques or forces to compensate for distortions in the optical waveform incident upon the mirror. "Depleted uranium" (0) means uranium depleted in the isotope 235 below that occurring in nature. "Development" (GTN NTN All) is related to all phases prior to serial production, such as: design, design research, design analyses, design concepts, assembly and testing of prototypes, pilot production schemes, design data, process of transforming design data into a product, configuration design, integration design, layouts. "Diffusion bonding" (1 2 9) means a solid state molecular joining of at least two separate metals into a single piece with a joint strength equivalent to that of the weakest material. "Digital computer" (4 5) means equipment which can, in the form of one or more discrete variables, perform all of the following: a. Accept data; b. Store data or instructions in fixed or alterable (writable) storage devices;
- "Monolithic integrated circuit" (3) means a combination of passive or active 'circuit elements' or both which: a. Are formed by means of diffusion processes, implantation processes or deposition processes in or on a single semiconducting piece of material, a so-called 'chip'; b. Can be considered as indivisibly associated; and c. Perform the function(s) of a circuit. N.B.:'Circuit element' is a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc. "Monospectral imaging sensors" (6) are capable of acquisition of imaging data from one discrete spectral band. "Multichip integrated circuit" (3) means two or more "monolithic integrated circuits" bonded to a common "substrate". "Multi-data-stream processing" (4) means the 'microprogramme' or equipment architecture technique which permits simultaneous processing of two or more data sequences under the control of one or more instruction sequences by means such as: a. Single Instruction Multiple Data (SIMD) architectures such as vector or array processors; b. Multiple Single Instruction Multiple Data (MSIMD) architectures; c. Multiple Instruction Multiple Data (MIMD) architectures, including those which are tightly coupled, closely coupled or loosely coupled; or d. Structured arrays of processing elements, including systolic arrays.
- 1: The "microprocessor microcircuit" normally does not contain integral user-accessible storage, although storage present on-the-chip may be used in performing its logic function. N.B. 2: This includes chip sets which are designed to operate together to provide the function of a "microprocessor microcircuit". "Microorganisms" (1 2) means bacteria, viruses, mycoplasms, rickettsiae, chlamydiae or fungi, whether natural, enhanced or modified, either in the form of isolated live cultures or as material including living material which has been deliberately inoculated or contaminated with such cultures. "Missiles" (1 3 6 7 9) means complete rocket systems and unmanned aerial vehicle systems, capable of delivering at least 500 kg payload to a range of at least 300 km. "Monofilament" (1) or filament is the smallest increment of fibre, usually several micrometres in diameter. "Monolithic integrated circuit" (3) means a combination of passive or active 'circuit elements' or both which: a. Are formed by means of diffusion processes, implantation processes or deposition processes in or on a single semiconducting piece of material, a so-called 'chip'; b. Can be considered as indivisibly associated; and c. Perform the function(s) of a circuit. N.B.:'Circuit element' is a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc. "Monospectral imaging sensors" (6) are capable of acquisition of imaging data from one discrete spectral band. "Multichip integrated circuit" (3) means two or more "monolithic integrated circuits" bonded to a common "substrate".
- 1:the "microprocessor microcircuit" normally does not contain integral user-accessible storage, although storage present on-the-chip may be used in performing its logic function. N.B. 2:this includes chip sets which are designed to operate together to provide the function of a "microprocessor microcircuit". "Microorganisms" (1 2) means bacteria, viruses, mycoplasms, rickettsiae, chlamydiae or fungi, whether natural, enhanced or modified, either in the form of "isolated live cultures" or as material including living material which has been deliberately inoculated or contaminated with such cultures. "Missiles" (1 3 6 7 9) means complete rocket systems and unmanned aerial vehicle systems, capable of delivering at least 500 kg payload to a range of at least 300 km. "Monofilament" (1) or filament is the smallest increment of fibre, usually several micrometres in diameter. "Monolithic integrated circuit" (3) means a combination of passive or active "circuit elements" or both which: a. are formed by means of diffusion processes, implantation processes or deposition processes in or on a single semiconducting piece of material, a so-called "chip"; b. can be considered as indivisibly associated; and c. perform the function(s) of a circuit. N.B.:"circuit element" is a single active or passive functional part of an electronic circuit, such as one diode, one transistor, one resistor, one capacitor, etc. "Monospectral imaging sensors" (6) are capable of acquisition of imaging data from one discrete spectral band. "Multichip integrated circuit" (3) means two or more "monolithic integrated circuits" bonded to a common "substrate".
- Vibration test systems employing feedback or closed loop techniques and incorporating a digital controller, capable of vibrating a system at 10 g rms or more over the entire range 20 Hz to 2000 Hz and imparting forces of 50 kN, measured 'bare table', or greater; b. Digital controllers, combined with specially designed vibration test software, with a "real time bandwidth" greater than 5 kHz designed for use with vibration test systems specified in 2B116.a.; c. Vibration thrusters (shaker units), with or without associated amplifiers, capable of imparting a force of 50 kN, measured 'bare table', or greater and usable in vibration test systems specified in 2B116.a.; d. Test piece support structures and electronic units designed to combine multiple shaker units in a system capable of providing an effective combined force of 50 kN, measured 'bare table', or greater, and usable in vibration systems specified in 2B116.a. Technical Note: In 2B116, 'bare table' means a flat table, or surface, with no fixture or fittings. 2B117 Equipment and process controls, other than those specified in 2B004, 2B005.a., 2B104 or 2B105, designed or modified for densification and pyrolysis of structural composite rocket nozzles and re-entry vehicle nose tips. 2B119 Balancing machines and related equipment, as follows: N.B.: SEE ALSO 2B219. a. Balancing machines having all the following characteristics: 1. Not capable of balancing rotors/assemblies having a mass greater than 3 kg; 2. Capable of balancing rotors/assemblies at speeds greater than 12500 rpm; 3. Capable of correcting unbalance in two planes or more; and 4. Capable of balancing to a residual specific unbalance of 0,2 g mm per kg of rotor mass; Note: 2B119.a. does not control balancing machines designed or modified for dental or other medical equipment.