Betekenis van:
vertical angle

vertical angle
Zelfstandig naamwoord
    • either of two equal and opposite angles formed by the intersection of two straight lines

    Hyperoniemen


    Voorbeeldzinnen

    1. Vertical angle.
    2. Vertical angle:
    3. Viewing angle (horizontal and vertical degrees)
    4. Simultaneously, there shall be an angle of free vertical movement 20o above and below the horizontal.
    5. Designed to take measurements at an angle exceeding 20° from the vertical;
    6. This angle is chosen in order to take account of the vertical static and dynamic load and is only applicable for a permitted static vertical load not exceeding:
    7. The sealing cone of swivel-nut type must be of the type with a half vertical angle of 45°.
    8. ‘Actual torso angle’ means the angle measured between a vertical line through the ‘H’ point and the torso line using the back angle quadrant on the 3-D H machine.
    9. ‘Actual torso angle’ means the angle measured between a vertical line through the ‘H’ point and the torso line using the back angle quadrant on the 3-D H machine. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph 3.2.2);
    10. ‘Actual torso angle’ means the angle measured between a vertical line through the ‘H’ point and the torso line using the back angle quadrant on the 3-D H machine. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph 3.2.2.);
    11. ‘Actual torso angle’ means the angle measured between a vertical line through the ‘H’ point and the torso line using the back angle quadrant on the 3-D H machine. The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph 3.2.2. below);
    12. This includes: 1) the horizontal angle the camera line of sight makes with respect to the earth's magnetic field direction and; 2) the vertical angle between the camera line of sight and the earth's horizon.
    13. Where the maximum permissible static vertical mass, S, exceeds 120 D, then the angle of test shall be increased to 20o.
    14. .4 Stairways shall not exceed 3,5 metres in vertical rise without the provision of a landing and shall not have an angle of inclination greater than 45 °.
    15. The centreline of the nozzle(s) shall be directed downward at an angle of 45° ± 5° to the vertical axis of a rotating test platform.