Betekenis van:
x-axis

Voorbeeldzinnen

1. x-axis travel greater than 2 m; and
2. X-axis travel greater than 2 m; and
3. Plot the values of absorbance on the y axis against apo-carotenic ester concentration on the x axis.
4. X-axis travel greater than 2 m; and b. Overall positioning accuracy on the x-axis more (worse) than 30 μm.
5. x-axis travel greater than 2 m; and b. overall positioning accuracy on the x-axis more (worse) than 30 μm.
6. the line parallel to the x-axis at holding force F = 0,
7. Overall positioning accuracy on the x-axis more (worse) than 30 µm.
8. overall positioning accuracy on the x-axis more (worse) than 30 μm.
9. Overall positioning accuracy on the x-axis more (worse) than 30 μm.
10. Two or more contouring rotary axes; Note: 2B201.a. does not control milling machines having the following characteristics: a. X-axis travel greater than 2 m; and b. Overall positioning accuracy on the x-axis more (worse) than 30 μm.
11. Measure the absorbances at 440 nm against a petroleum spirit (4.2) blank. Plot the values of absorbance on the y axis against apo-carotenic ester concentration on the x axis.
12. Jig grinders with axes limited to x, y, c and a where c axis is used to maintain the grinding wheel normal to the work surface, and the a axis is configured to grind barrel cams;
13. Insoluble sodium metaphosphate is a high molecular weight sodium polyphosphate composed of two long metaphosphate chains (NaPO3)x that spiral in opposite directions about a common axis.
14. Rolling stock coordinates: rolling stock coordinates, figure 1, are based on the right hand rule Cartesian coordinate system, where the positive X-axis (longitudinal) is along the vehicle in the direction of travel, the Z-axis is vertically upwards and the origin is at the centre of the wheelset axle.
15. A type 2 test block is placed on the raised test floor with its largest surface 500 x 350 mm, centrally in relation to the longitudinal axis of the vehicle and with its surface 500 x 125 mm to the front.