Betekenis van:
energy unit
energy unit
Zelfstandig naamwoord
- warmte-eenheid
- a unit of measurement for work
Synoniemen
Hyperoniemen
Hyponiemen
Voorbeeldzinnen
- Energy savings: system unit
- megajoules per unit of energy
- effectiveness: reduction of CO2 emissions per unit energy,
- The computer system unit shall meet the Energy Star configuration requirements that enable energy efficiency modes.
- The consumer area does not belong to the cogeneration unit, but consumes the energy outputs generated by the cogeneration unit.
- a single monetary value per unit of energy shall be used.
- What is the projected increase of renewable energy use in buildings until 2020? (If possible differentiating between residential — ‘single-unit’ and ‘multiple unit’, commercial, public and industrial.)
- The thermal energy required to produce these additional electrical energy outputs has to be excluded from the useful heat output of the cogeneration unit as a whole.
- Suppliers should, by 31 December 2020, gradually reduce life cycle greenhouse gas emissions by up to 10 % per unit of energy from fuel and energy supplied.
- Member States shall designate the supplier or suppliers responsible for monitoring and reporting life cycle greenhouse gas emissions per unit of energy from fuel and energy supplied.
- the use of any technology (including carbon capture and storage) capable of reducing life cycle greenhouse gas emissions per unit of energy from fuel or energy supplied;
- a single monetary value per unit of energy shall be used. This single value shall be the lower of the cost per unit of energy of petrol or diesel before tax when used as a transport fuel,
- The secondary steam turbines (see Figure 4) must be included as part of the cogeneration unit. The electrical energy output of a secondary steam turbine forms part of the energy outputs from the cogeneration unit.
- Including unavoidable thermal energy losses and ‘non-economically justifiable demanded’ heat produced by the co-generation unit.
- N.B.:'Active tooling unit' means a device for applying motive power, process energy or sensing to the workpiece.