Betekenis van:
equilibrate

Voorbeeldzinnen

1. Allow the column to equilibrate for 10 minutes before use.
2. g-1cm3 CaCl2 sol. to equilibrate the soil
3. Place the tube into the water bath (6.10) and allow to equilibrate to 25 °C
4. Allow the system to equilibrate and obtain a satisfactory stable response before commencing any analysis.
5. Allow the system to equilibrate with that flow rate and at 85 °C for 2 h or until a stable baseline is obtained.
6. Add 45,0 ml of water, mix, and equilibrate for 5 min. Add 105,0 ml of methanol-acetonitrile (3.5), stopper and homogenise.
7. Add 15,0 ml of water, mix, and equilibrate for 5 min. Add 35,0 ml of methanol-acetonitrile (3.5), stopper and shake for 30 min. on the shaker or stir on the magnetic stirrer (4.1).
8. Leave the remaining methanol for 10 minutes to equilibrate with the resin and continue the elution at a rate not exceeding 20 ml/min. collecting the eluate in the same round-bottomed flask.
9. Starting up the system on a daily basis, flush the column with 100 % solvent B for 15 minutes, then set at A:B = 40:60 and equilibrate at 1 ml/min for 15 minutes.
10. Starting up the system on a daily basis, flush the column with 100 % solvent B for 15 minutes, then set at A:B = 40:60 and equilibrate at 1 ml/min for 15 minutes. Perform a blank run by injecting methanol (4.2.1).