Betekenis van:
milling machine

Voorbeeldzinnen

1. Machine tools for milling having any of the following:
2. Machine tools for drilling, boring or milling metal
3. Note 2:A machine tool having at least two of the three turning, milling or grinding capabilities (e.g., a turning machine with milling capability), must be evaluated against each applicable entry 2B001.a. or 2B201.a. or b.
4. BB is a large company which produces machine tool fixtures such as lathe chucks, spindle tooling, milling fixtures and tool holders. It was created in 1948 as a State enterprise.
5. If any axis of a machine model not controlled by 2B001.a. to 2B001.c. or 2B201 has a stated accuracy  of 6 microns for grinding machines and 8 microns for milling and turning machines or better, the manufacturer should be required to reaffirm the accuracy level once every eighteen months.
6. Interchangeable tools for hand tools, whether or not power-operated, or for machine tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning or screw driving), including dies for drawing or extruding metal, and rock-drilling or earth-boring tools:
7. Interchangeable tools for hand tools, whether or not power-operated, or for machine-tools (for example, for pressing, stamping, punching, tapping, threading, drilling, boring, broaching, milling, turning, or screwdriving), including dies for drawing or extruding metal, and rock drilling or earth boring tools
8. If any axis of a machine model not controlled by 2B001.a. to 2B001.c. or 2B201 has a stated accuracy  of 6 microns for grinding machines and 8 microns for milling and turning machines or better, the manufacturer should be required to reaffirm the accuracy level once every eighteen months.
9. Since the Category 2 list refers to each linear axis there will be as many stated values as there are linear axes; f. If any axis of a machine model not controlled by 2B001.a. to 2B001.c. or 2B201 has a stated accuracy  of 6 microns for grinding machines and 8 microns for milling and turning machines or better, the manufacturer should be required to reaffirm the accuracy level once every eighteen months. 2B001
10. Machine tools for turning, having all of the following characteristics: 1. Positioning accuracy with "all compensations available" equal to or less (better) than 6 μm according to ISO 230/2 (1988) [1] Manufacturers calculating positioning accuracy in accordance with ISO 230/2 (1997) should consult the competent authorities of the Member State in which they are established. or national equivalents along any linear axis; and 2. Two or more axes which can be coordinated simultaneously for "contouring control"; Note: 2B001.a. does not control turning machines specially designed for the production of contact lenses. b. Machine tools for milling, having any of the following characteristics: