Betekenis van:
occupant

Voorbeeldzinnen

1. When passenger seats are required with occupant restraint systems, each wheelchair space shall be provided with a restraint system capable of restraining the wheelchair and its occupant.
2. For other seats, the centre plane of the occupant is specified by the manufacturer;
3. For individual seats, the centreplane of the seat coincides with the centreplane of the occupant.
4. It is often difficult or impossible for an occupant to touch the handle with his knees.
5. For individual seats, the centre plane of the seat coincides with the centre plane of the occupant. For other seats, the centre plane of the occupant is specified by the manufacturer;
6. Description of the adjustment, displacement and locking systems of the seat or of its parts and a description of occupant protection system against displacement of luggage
7. However, protective systems that can be deactivated by the driver or the occupant have to be set as recommended and indicated by the manufacturer in the owners handbook.
8. Significant electrostatic forces in relation to the vehicle's external environment only occur at the moment of occupant entry into or exit from the vehicle.
9. ‘Centreplane of occupant’ (C/LO) means the median plane of the 3-D H machine positioned in each designated seating position; it is represented by the co-ordinate of the ‘H’ point on the ‘Y’ axis. For individual seats, the centreplane of the seat coincides with the centreplane of the occupant.
10. ‘Centreplane of occupant’ (C/LO) means the median plane of the 3-D H machine positioned in each designated seating position; it is represented by the coordinate of the ‘H’ point on the ‘Y’ axis.
11. In a vehicle where passenger seats are not required to be fitted with any kind of occupant restraint system, the wheelchair space shall be fitted with a restraint system in order to warrant the stability of the wheelchair.
12. Those parts (switches, pull-knobs etc.) which can be contacted by using the apparatus and procedure described below shall be considered being likely to be contacted by the knees of an occupant. Foot-operated controls are fitted as foot pedals.
13. ‘Centreplane of occupant’ (C/LO) means the median plane of the 3-D H machine positioned in each designated seating position; it is represented by the co-ordinate of the ‘H’ point on the ‘Y’ axis.
14. ‘passenger compartment’ means the space for occupant accommodation bounded by the roof, floor, side walls, doors, outside glazing, front bulkhead, and the plane of the rear compartment bulkhead or the plane of the rear seat back support;
15. The reference point shall be obtained using the device illustrated in figures 1 and 2 of the Appendix to this Annex, which makes it possible to simulate loading by a human occupant.