Betekenis van:
optical device

Voorbeeldzinnen

1. with integrated optical block, front module or similar device (see description below), connection or capability;
2. ‘Light source module’ means an optical part of a device which is specific to that device, is containing one or more non-replaceable light sources, and is only removable from its device with the use of tool(s).
3. N.B.:’Active tooling unit’ means a device for applying motive power, process energy or sensing to the workpiece. "Equivalent Density" (6) means the mass of an optic per unit optical area projected onto the optical surface.
4. ‘light emitting diode’ or ‘LED’ means a solid state device embodying a p-n junction, emitting optical radiation when excited by an electric current;
5. ‘Retro-reflecting device’ [1] Also called ‘retro-reflectors’. means an assembly ready for use and comprising one or more retro-reflecting optical units.
6. The two samples shall be subjected to the test for stability in time of the optical properties of retro-reflecting device (Annex 9).
7. ‘Rear registration-plate lamp’ means the device used to illuminate the space intended to accommodate the rear registration plate; it may consist of different optical elements.
8. "Numerical control" (2) means the automatic control of a process performed by a device that makes use of numeric data usually introduced as the operation is in progress (ref. ISO 2382). "Object code" (9) means an equipment executable form of a convenient expression of one or more processes ("source code" (source language)) which has been converted by programming system. "Optical amplification" (5), in optical communications, means an amplification technique that introduces a gain of optical signals that have been generated by a separate optical source, without conversion to electrical signals, i.e., using semiconductor optical amplifiers, optical fibre luminescent amplifiers. "Optical computer" (4) means a computer designed or modified to use light to represent data and whose computational logic elements are based on directly coupled optical devices.
9. laser (light amplification by stimulated emission of radiation): any device which can be made to produce or amplify electromagnetic radiation in the optical radiation wavelength range primarily by the process of controlled stimulated emission;
10. The FOM II pistol consists of an optical probe with a knife, a depth measurement device and a data acquisition and analysis board. All legally relevant acquisition and analysis are contained within the FOM II pistol.
11. "End-effectors" (2) means grippers, ’active tooling units’ and any other tooling that is attached to the baseplate on the end of a "robot" manipulator arm. N.B.:’Active tooling unit’ means a device for applying motive power, process energy or sensing to the workpiece. "Equivalent Density" (6) means the mass of an optic per unit optical area projected onto the optical surface.
12. "End-effectors" (2) means grippers, "active tooling units" and any other tooling that is attached to the baseplate on the end of a "robot" manipulator arm. N.B.:"active tooling unit" means a device for applying motive power, process energy or sensing to the workpiece. "Equivalent Density" (6) means the mass of an optic per unit optical area projected onto the optical surface.
13. The illuminating surface of a retro-reflecting device shall be considered to be continuous if the edges of the illuminating surfaces of adjacent separate optical units are parallel and if the said optical units are evenly distributed over the whole solid surface of the triangle.
14. The two samples shall, if necessary, be subjected to the corrosion test (Annex 8, paragraph 2), and then to the abrasive-strength test of the rear face of the retro-reflecting device (Annex 8, paragraph 5). Third group: The two samples shall be subjected to the test for stability in time of the optical properties of retro-reflecting device (Annex 9). Fourth group:
15. "Numerical control" (2) means the automatic control of a process performed by a device that makes use of numeric data usually introduced as the operation is in progress (ref. ISO 2382). "Object code" (9) means an equipment executable form of a convenient expression of one or more processes ("source code" (source language)) which has been converted by programming system. "Optical amplification" (5), in optical communications, means an amplification technique that introduces a gain of optical signals that have been generated by a separate optical source, without conversion to electrical signals, i.e., using semiconductor optical amplifiers, optical fibre luminescent amplifiers. "Optical computer" (4) means a computer designed or modified to use light to represent data and whose computational logic elements are based on directly coupled optical devices. "Optical integrated circuit" (3) means a "monolithic integrated circuit" or a "hybrid integrated circuit", containing one or more parts designed to function as a photosensor or photoemitter or to perform (an) optical or (an) electro-optical function(s). "Optical switching" (5) means the routing of or switching of signals in optical form without conversion to electrical signals. "Overall current density" (3) means the total number of ampere-turns in the coil (i.e., the sum of the number of turns multiplied by the maximum current carried by each turn) divided by the total cross-section of the coil (comprising the superconducting filaments, the metallic matrix in which the superconducting filaments are embedded, the encapsulating material, any cooling channels, etc.). "Participating state" (7 9) is a state participating in the Wassenaar Arrangement. (See www.wassenaar.org)