Betekenis van:
perpendicularly

perpendicularly
Bijwoord
    • in a perpendicular manner
    "this red line runs perpendicularly to the green line"
    perpendicularly
    Bijwoord
      • straight up or down without a break

      Synoniemen


      Voorbeeldzinnen

      1. applied perpendicularly to the top of the frame in the central plane of the tractor.
      2. Fi = 15 M applied perpendicularly to the top of the frame in the central plane of the tractor.
      3. the distance between two adjacent/tangential distinct parts does not exceed 15 mm when measured perpendicularly to the reference axis.
      4. Passing the land marker shall be recorded perpendicularly to the axis of the vessel and shall be entered in the report.
      5. the distance between two adjacent/tangential distinct parts does not exceed 15 mm when measured perpendicularly to the reference axis, or
      6. ‘Coupling (hitch) height’ means the height when measured perpendicularly from the centre of the articulation point of the trailer towing coupling or hitch to the ground, when the towing vehicle and trailer are coupled together.
      7. Luminance measurements shall be made perpendicularly to the surface of the diffuse colourless surface with the tolerance of 5° in each direction at the points shown in Annex 3 to this Regulation, each point representing a circular area of 25 mm in diameter.
      8. Luminance measurements shall be made perpendicularly to the surface of the diffuse colourless surface with the tolerance of 5° in each direction at the points shown in Annex 3 to this Regulation, each point representing a circular area of 25 mm in diameter. The measured luminance shall be corrected for the diffuse reflection factor 1,0.
      9. Either the total area of the projection of the distinct parts on a plane tangent to the exterior surface of the transparent material and perpendicular to the reference axis shall occupy not less than 60 per cent of the smallest quadrilateral circumscribing the said projection, or the distance between two adjacent/tangential distinct parts shall not exceed 15 mm when measured perpendicularly to the reference axis.