Betekenis van:
rigging

rigging
Zelfstandig naamwoord
  • het touwwerk en de zeilen van een schip
  • gear consisting of ropes etc. supporting a ship's masts and sails

Synoniemen

Hyperoniemen

rigging
Zelfstandig naamwoord
  • touwwerk op een schip
  • formation of masts, spars, sails, etc., on a vessel

Synoniemen

Hyperoniemen

Hyponiemen

rigging
Zelfstandig naamwoord
  • gijn
  • gear consisting of ropes etc. supporting a ship's masts and sails

Synoniemen

Hyperoniemen

Werkwoord

rigging

Voorbeeldzinnen

  1. Sharks have been seen from the rigging - it is not safe to bathe any longer; - be quick, get into the boat.
  2. Brake rigging shall be free
  3. Attachments to and rigging of trawl nets
  4. boats, outboard motors, jet skis, sails, rigging and superstructures,
  5. Technical conditions for attachments to and rigging of trawl nets
  6. The rigging of trawl nets shall comply with the technical specifications laid down in Annex I(b) to this Regulation.
  7. Parking brake components, rigging, leadscrews & nuts etc, shall be free moving and lubricated if required by the design.
  8. Brake rigging shall be free to move and allow brake pads/blocks to clear the brake discs/wheels in the released state and not reduce application forces below design Brake rigging shall be free 15
  9. Brake rigging shall be free such that the pads/blocks clear the brake discs/wheels in the released state, and application forces are not reduced below design.
  10. The different wagon braking forces specified in the standards for operation on 1435 mm and 1520 mm track gauges can be accommodated by an appropriate adjustment to the brake rigging or the brake cylinder.
  11. Brake rigging shall be free to move and allow brake pads/blocks to clear the brake discs/wheels in the released state and not reduce application forces below design
  12. In order to allow for a transitional period, before increasing the mesh size of bottom trawl nets, it is appropriate to determine some characteristics in the rigging of the trawl nets that will enhance the selectivity of the currently used mesh size.