Betekenis van:
solder

to solder
Werkwoord
  • hechten met soldeer
  • join or fuse with solder
"solder these two pipes together"

Hyperoniemen

Hyponiemen

solder
Zelfstandig naamwoord
  • verbindingsmetaal zoals tin
  • an alloy (usually of lead and tin) used when melted to join two metal surfaces

Hyperoniemen

Hyponiemen

solder
Zelfstandig naamwoord
  • soldeersel
  • an alloy (usually of lead and tin) used when melted to join two metal surfaces

Hyperoniemen

Hyponiemen


Voorbeeldzinnen

  1. "Solder, soldier! Blood is thicker", Quoth he, "than liqueur or liquor".
  2. Solder in electrical applications on glass
  3. Solder in electronic circuit boards and other electric applications
  4. Base metal coated rods and cored wire, for soldering/brazing/welding by flame excluding wire/rods of cored solder, solder consisting of alloy with ≥ 2 %, of any one precious metal
  5. Base metal cored wire for electric arc-welding (excluding wire and rods of cored solder, the solder consisting of an alloy containing 2 % or more by weight, of any one precious metal)
  6. Base metal cored wire for electric arc-welding (excluding wire and rods of cored solder, the solder consisting of an alloy containing 2 % or more by weight, of any one precious metal)
  7. There are various types of fittings such as end-feed, solder ring, compression, press and push-fit.
  8. Lead alloys as solder for transducers used in high-powered (designated to operate for several hours at acoustic power levels of 125 dB SPL and above) loudspeakers.’
  9. Weld, braze and/or solder leak free joints on metallic tubes and pipes that can be used in refrigeration, air-conditioning or heat pump systems
  10. Cadmium alloys as electrical/mechanical solder joints to electrical conductors located directly on the voice coil in transducers used in high-powered loudspeakers with sound pressure levels of 100 dB (A) and more.
  11. Cadmium alloys as electrical/mechanical solder joints to electrical conductors located directly on the voice coil in transducers used in high-powered loudspeakers with sound pressure levels of 100 dB (A) and more
  12. Commission Decision 2008/689/EC of 1 August 2008 amending Annex II to Directive 2000/53/EC of the European Parliament and of the Council on end-of-life vehicles [2] specifies that in the case of solder in electronic circuit boards and other electrical applications except on glass, described in point (8)(a), and solder in electrical applications on glass, described in point (8)(b), the exemptions should be reviewed in 2009.
  13. Lead in solder to attach heat spreaders to the heat sink in power semiconductor assemblies with a chip size of at least 1 cm2 of projection area and a nominal current density of at least 1 A/mm2 of silicon chip area