Betekenis van:
wiper

wiper
Zelfstandig naamwoord
  • wisser op de ruit v.e. auto
  • a mechanical device that cleans the windshield

Synoniemen

Hyperoniemen

wiper
Zelfstandig naamwoord
    • a worker who wipes

    Hyperoniemen

    wiper
    Zelfstandig naamwoord
      • contact consisting of a conducting arm that rotates over a series of fixed contacts and comes to rest on an outlet

      Synoniemen

      Hyperoniemen


      Voorbeeldzinnen

      1. The German word "Scheibenwischer" means "windshield wiper".
      2. I used my windshield wiper to clean the snow on my window.
      3. Windscreen wiper
      4. Fuser wiper
      5. Rear window wiper
      6. Intermittent windscreen wiper
      7. wiper and washer devices,
      8. Wiper and washer devices;
      9. wiper and washer devices, front or rear marking-plates,
      10. the windshield wiper is switched ON and its continuous or automatically controlled operation has occurred for a period of at least two minutes.
      11. The exterior rear-view mirror must be visible through the portion of the windscreen that is swept by the windscreen wiper or through the side windows if the tractor is fitted with them.
      12. All equipment capable of generating broadband emissions which can be switched on permanently by the driver or passenger should be in operation in maximum load, e.g. wiper motors or fans.
      13. Council Directive 78/318/EEC of 21 December 1977 on the approximation of the laws of the Member States relating to the wiper and washer systems of motor vehicles (OJ L 81, 28.3.1978, p. 49), as amended by:
      14. The manufacturer or his representative shall submit to the type-approval authority the application for EC type-approval of a vehicle with regard to its windscreen wiper and washer systems.
      15. The windscreen wiper fittings shall be such that the wiper shaft is furnished with a protective casing which has a radius of curvature meeting the requirements of paragraph 5.4 above and an end surface area of not less than 150 mm2. In the case of rounded covers, these shall have a minimum projected area of 150 mm2 when measured not more than 6,5 mm from the point projecting furthest.