Betekenis van:
actuation

actuation
Zelfstandig naamwoord
  • kracht die iets voortstuwt
  • the act of propelling

Synoniemen

Hyperoniemen

Hyponiemen


Voorbeeldzinnen

  1. Enter also any electrical auxiliary engines for manual actuation.
  2. Good knowledge of types of valves, actuation mechanisms, safe handling, prevention of discharge and leakage
  3. The control(s) shall be designed in a way which avoids unintentional actuation.
  4. Actuation of this device must require minimum effort and must jack reliably into its final position.
  5. This may be tested by placing an opaque surface between the actuation device and the vehicle.
  6. the operation distance between the actuation device and the vehicle shall not exceed 6 m;
  7. the operation distance between the actuation device and the vehicle shall not exceed 11 m, provided that the system requires a direct line of sight between the actuation device and the vehicle.
  8. It must be possible to start machinery only by voluntary actuation of a control device provided for the purpose.
  9. The driver shall be able to inhibit the automatic closing process by actuation of a special control.
  10. The switches shall require continuous actuation for closing except in the case of paragraphs 5.8.2.7, 5.8.2.9 or 5.8.3.
  11. the operation distance between the actuation device and the vehicle shall not exceed 11 m, provided that the system requires a direct line of sight between the actuation device and the vehicle. This may be tested by placing an opaque surface between the actuation device and the vehicle.
  12. Remote closing shall be allowed by continuous activation of a remote actuation device, provided one of the following conditions is fulfilled:
  13. The start control shall work according to the “hold-to-run principle” for at least the first three seconds of actuation.
  14. be equipped with an axle providing one test position having an hydraulic brake and actuation system that can be operated from the towing vehicle if applicable.
  15. The changeover from one distributor system to another shall take place during the gauge changeover operation using the 1435 mm/1520 mm changeover device. Actuation of this device must require minimum effort and must jack reliably into its final position.