Betekenis van:
change surface

Voorbeeldzinnen

1. The greening of surface transport: Developing technologies and knowledge for reduced pollution (air including greenhouse gases, water and soil) and environmental impact on such areas as climate change, health, biodiversity and noise.
2. "Run-out" (2) (out-of-true running) means radial displacement in one revolution of the main spindle measured in a plane perpendicular to the spindle axis at a point on the external or internal revolving surface to be tested (Reference: ISO 230/1 1986, paragraph 5.61). "Scale factor" (gyro or accelerometer) (7) means the ratio of change in output to a change in the input intended to be measured.
3. "Run-out" (2) (out-of-true running) means radial displacement in one revolution of the main spindle measured in a plane perpendicular to the spindle axis at a point on the external or internal revolving surface to be tested (Reference: ISO 230/1 1986, paragraph 5.61). "Scale factor" (gyro or accelerometer) (7) means the ratio of change in output to a change in the input intended to be measured.
4. "Run-out" (2) (out-of-true running) means radial displacement in one revolution of the main spindle measured in a plane perpendicular to the spindle axis at a point on the external or internal revolving surface to be tested (Reference: ISO 230/1 1986, paragraph 5.61). "Scale factor" (gyro or accelerometer) (7) means the ratio of change in output to a change in the input intended to be measured.
5. Only flame retardants that are chemically bound into the polymer fibre or onto the fibre surface (reactive flame retardants) may be used in the product. If the flame retardants used have any of the R-phrases listed below, these reactive flame retardants should, on application, change their chemical nature to no longer warrant classification under any of these R-phrases.
6. "Run-out" (2) (out-of-true running) means radial displacement in one revolution of the main spindle measured in a plane perpendicular to the spindle axis at a point on the external or internal revolving surface to be tested (Reference: ISO 230/1 1986, paragraph 5.61). "Scale factor" (gyro or accelerometer) (7) means the ratio of change in output to a change in the input intended to be measured. Scale factor is generally evaluated as the slope of the straight line that can be fitted by the method of least squares to input-output data obtained by varying the input cyclically over the input range.
7. Stacker cranes defined as Cartesian coordinate manipulator systems manufactured as an integral part of a vertical array of storage bins and designed to access the contents of those bins for storage or retrieval. "Rotary atomisation" (1) means a process to reduce a stream or pool of molten metal to droplets to a diameter of 500 micrometre or less by centrifugal force. "Roving" (1) is a bundle (typically 12-120) of approximately parallel 'strands'. N.B.:'Strand' is a bundle of "monofilaments" (typically over 200) arranged approximately parallel. "Run-out" (2) (out-of-true running) means radial displacement in one revolution of the main spindle measured in a plane perpendicular to the spindle axis at a point on the external or internal revolving surface to be tested (Reference: ISO 230/1 1986, paragraph 5.61). "Scale factor" (gyro or accelerometer) (7) means the ratio of change in output to a change in the input intended to be measured.
8. "Rotary atomisation" (1) means a process to reduce a stream or pool of molten metal to droplets to a diameter of 500 micrometre or less by centrifugal force. "Roving" (1) is a bundle (typically 12-120) of approximately parallel 'strands'. N.B.:'Strand' is a bundle of "monofilaments" (typically over 200) arranged approximately parallel. "Run-out" (2) (out-of-true running) means radial displacement in one revolution of the main spindle measured in a plane perpendicular to the spindle axis at a point on the external or internal revolving surface to be tested (Reference: ISO 230/1 1986, paragraph 5.61). "Scale factor" (gyro or accelerometer) (7) means the ratio of change in output to a change in the input intended to be measured.