- kaart voor in de computer
- a printed circuit that can be inserted into expansion slots in a computer to increase the computer's capabilities
- Plug this in.
- The only plug-in that crashes on my browser is Flash.
- Service is required when the apparatus has been damaged in any way, such as power-supply cord or plug damaged, liquid has been spilled or objects have fallen into the apparatus, this apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
- This applies in particular in respect of the operating system, the Internet browser and plug-ins.
- The shielding shall not be in direct contact with the fusible plug (PRD).
- In the case of machinery capable of being plugged into an electricity supply, removal of the plug is sufficient, provided that the operator can check from any of the points to which he has access that the plug remains removed.
- the integration of future new or upgraded ITS applications in a ‘plug and play’ manner into an open in-vehicle platform,
- an electrical cable, with a heat resistant sleeve, which connects the product to a plug and which, in turn, enables connection to the vehicle’s engine management system.
- The holes in this particular protector (where the pins of the plug go through) are so narrow that the pins can get stuck.
- The holes in this particular protector (where the pins of the plug go through) are so narrow that the pins can get stuck. This means that the user may pull the protector off the outlet when the plug is pulled out.
- In 6A005 ’Wall-plug efficiency’ is defined as the ratio of "laser" output power (or "average output power") to total electrical input power required to operate the "laser", including the power supply/conditioning and thermal conditioning/heat exchanger.
- This connection shall be internally threaded with standard pipe threads of a size not larger than one-half inch, and shall be closed by a plug when not in use (equivalent connections are allowed).’
- in 6A005 "Wall-plug efficiency" is defined as the ratio of "laser" output power (or "average output power") to total electrical input power required to operate the "laser", including the power supply/conditioning and thermal conditioning/heat exchanger.
- As regards stationary applications, the bans only apply to small plug in units with a refrigerant charge of 150 g or less and to stand alone equipment with a refrigerant charge of 20 kg or over.
- Note:Instrumentation cameras, specified in 6A003.a.3. to 6A003.a.5., with modular structures should be evaluated by their maximum capability, using plug-ins available according to the camera manufacturer's specifications.