Betekenis van:
quenching

Werkwoord

Voorbeeldzinnen

1. "splat quenching";
2. Filters for quenching emissions
3. Use of SF6 in electric power equipment (insulation, arc quenching)
4. The biogas is combusted rapidly at a minimum of 900 °C, and followed by rapid chilling (‘quenching’).
5. Ovens including coke-oven batteries with ancillary equipment such as charges, pushers, crushers, etc., as well as coke cars and quenching towers,
6. "Splat Quenching" (1) means a process to ’solidify rapidly’ a molten metal stream impinging upon a chilled block, forming a flake-like product.
7. Negative interference occurs in NDIR instruments by the interfering gas broadening the absorption band of the measured gas, and in CLD instruments by the interfering gas quenching the radiation.
8. "Splat Quenching" (1) means a process to ’solidify rapidly’ a molten metal stream impinging upon a chilled block, forming a flake-like product. N.B.:’Solidify rapidly’ solidification of molten material at cooling rates exceeding 1,000 K/s.
9. "Splat Quenching" (1) means a process to 'solidify rapidly' a molten metal stream impinging upon a chilled block, forming a flake-like product. N.B.:'Solidify rapidly' solidification of molten material at cooling rates exceeding 1000 K/s.
10. The biogas produced during the process is combusted rapidly in the same plant at a minimum of 900 °C followed by rapid chilling (‘quenching’), and an appropriate gas clean-up system is in place to exclude contamination with protein residues of the biogas or the gases derived from its burning.
11. "Specific tensile strength" (0 1 9) is ultimate tensile strength in pascals, equivalent to N/m2 divided by specific weight in N/m3, measured at a temperature of (296 ± 2) K ((23 ± 2) °C) and a relative humidity of (50 ± 5) %. "Splat Quenching" (1) means a process to ’solidify rapidly’ a molten metal stream impinging upon a chilled block, forming a flake-like product.
12. "Specific tensile strength" (0 1 9) is ultimate tensile strength in pascals, equivalent to N/m2 divided by specific weight in N/m3, measured at a temperature of (296 ± 2) K ((23 ± 2) °C) and a relative humidity of (50 ± 5) %. "Splat Quenching" (1) means a process to "solidify rapidly" a molten metal stream impinging upon a chilled block, forming a flake-like product. N.B.:"solidify rapidly" solidification of molten material at cooling rates exceeding 1000 K/s. "Spread spectrum" (5) means the technique whereby energy in a relatively narrow-band communication channel is spread over a much wider energy spectrum. "Spread spectrum" radar (6) — see "Radar spread spectrum"