Betekenis van:
rear back

Voorbeeldzinnen

1. the seat-back and the rear parts of seats;
2. The foam and rubber skin must be folded back towards the rear, with the rubber skin attached via spacers to the rear member so that the sides of the rubber skin are held parallel.
3. In the case of separate front seats, the rear passengers’ head-impact zone shall extend for 10 cm on either side of the seat centre-line, in the top part of the rear of the seat-back.
4. ‘passenger compartment’ means the space for occupant accommodation bounded by the roof, floor, side walls, doors, outside glazing, front bulkhead, and the plane of the rear compartment bulkhead or the plane of the rear seat back support;
5. The foam and rubber skin shall be folded back towards the rear, with the rubber skin attached via spacers to the rear member so that the sides of the rubber skin are held parallel.
6. If the back(s) of the rear seat(s) can be folded down, they shall be secured in their upright normal position by the standard locking mechanism.
7. ‘passenger compartment’ means the space for occupant accommodation, bounded by the roof, floor, side walls, doors, outside glazing, front bulkhead, and the plane of the rear compartment bulkhead or the plane of the rear seat back support, and if necessary any partition of the tray(s) containing the monoblocs of the electric vehicle's propulsion battery;
8. In the case of separate seats without head restraints, this area shall include the rear part of the seat-back between the longitudinal vertical planes situated at 100 mm on either side of the longitudinal median plane of the seat centre line, and above a plane perpendicular to the reference line 100 mm below the top of the seat-back.
9. Tests on the seat-back With the seat installed as indicated in paragraph 1.1 of this annex, the direction of impact from the rear towards the front shall be situated in a longitudinal plane at an angle of 45° from the vertical.
10. ‘Passenger and load compartment’ means the space in the vehicle for occupant accommodation and bounded by the roof, floor, side walls, outside glazing, front bulkhead and the plane of the rear-seat back support and eventually the partition between it and the compartment(s) containing the battery or battery modules.