Betekenis van:
seating area

Voorbeeldzinnen

1. Any transition from a sunken gangway to a seating area shall not be considered to be a step.
2. If a vehicle is designed to have a variable number of seating places, area available for standing passengers or number of wheelchairs carried, the requirements of paragraph 7.2.3.1. shall apply to each maximum seating capacity and the corresponding number of wheelchairs and standing passengers as appropriate.
3. The Administration of the flag State may permit additional seating in the main reception area within a stairway enclosure if it is fixed, non-combustible and does not restrict the passenger escape route.
4. However, in case of tyres identified by the ‘tyre to rim fitment configuration’ (see para. 3.1.10) symbol ‘A’ or ‘U’, it means the area of the tyre which is seating on the rim.
5. However, in case of tyres identified by the ‘tyre to rim fitment configuration’ (see paragraph 3.1.11) symbol ‘A’, it means the area of the tyre which is seating on the rim.
6. If the maximum approved passenger seating configuration is more than 200 an additional crash axe or crowbar must be carried and located in or near the most rearward galley area.
7. The area of the seating position contacted by the 3-D H machine shall be covered by a muslin cotton, of sufficient size and appropriate texture, described as a plain cotton fabric having 18,9 threads per cm and weighing 0,228 kg/m2 or knitted or non-woven fabric having equivalent characteristics.
8. The area of the seating position contacted by the 3-D H machine shall be covered by a muslin cotton, of sufficient size and appropriate texture, described as a plain cotton fabric having 18,9 threads per cm and weighing 0,228 kg/m2 or knitted or non-woven fabric having equivalent characteristics.
9. The Administration of the flag State may permit additional seating in the main reception area within a stairway enclosure if it is fixed, non-combustible and does not restrict the passenger escape route. Furniture shall not be permitted in passenger and crew corridors forming escape routes in cabin areas.
10. The area of the seating position contacted by the 3-D H machine shall be covered by a muslin cotton, of sufficient size and appropriate texture, described as a plain cotton fabric having 18,9 threads per cm2 and weighing 0,228 kg m2 or knitted or non-woven fabric having equivalent characteristics.
11. In the case of seats or bench seats with head restraints, this area shall extend between the longitudinal vertical planes, on either side of and 70 mm from the longitudinal median plane of the seat or of the seating position concerned and situated above the plane perpendicular to the reference line 635 mm from the R point.
12. In the case of a vehicle equipped with a variable seating capacity, area available for standing passengers (S1) and/or equipped for the carriage of wheelchairs, the requirements of sections 7.4.3.2 and 7.4.3.3 shall be determined for each of the following conditions as applicable:
13. In the case of seats or bench seats with head restraints, this area shall extend between the longitudinal vertical planes, on either side of and 70 mm from the longitudinal median plane of the seat or of the seating position concerned and situated above the plane perpendicular to the reference line 635 mm from the R point. For the test, the head restraint, if adjustable shall be placed in the most unfavourable position (generally the highest) permitted by its adjustment system.