Betekenis van:
temperature unit

Voorbeeldzinnen

1. ‘Unit of thermodynamic temperature
2. a temperature-adjustable vaporisation unit
3. ‘Special name and symbol of the SI derived unit of temperature for expressing Celsius temperature’;
4. The stabilised temperature of the test apparatus and the vehicle or separate technical unit must be 20° ± 4°C.
5. in Chapter I, point 1.1, the paragraph entitled ‘Unit of thermodynamic temperature’ shall be replaced by the following:
6. The stabilised temperature of the test apparatus and the vehicle or separate technical unit must be 20° ± 4 °C.
7. The filling unit shall comply with the external leak test and seat leak test at ambient temperature.
8. The stabilised temperature of the test apparatus and the vehicle or separate technical unit shall be 20 ± 4 °C.
9. ‘air-conditioning system’ means a combination of the components required to provide a form of indoor air treatment, by which temperature is controlled or can be lowered; 16. ‘boiler’ means the combined boiler body-burner unit, designed to transmit to fluids the heat released from burning;
10. Prior to the test, the tank must be filled to 50 per cent of its capacity with testing fuel and stored, without being sealed, at an ambient temperature of 313 K ± 2 K (40 °C ± 2 °C) until the weight loss per unit time becomes constant, but for not more than four weeks (preliminary storage time).
11. "Composite" (1 2 6 8 9) means a "matrix" and an additional phase or additional phases consisting of particles, whiskers, fibres or any combination thereof, present for a specific purpose or purposes. "Compound rotary table" (2) means a table allowing the workpiece to rotate and tilt about two non-parallel axes, which can be coordinated simultaneously for "contouring control". "Computing element" ("CE") (4) means the smallest computational unit that produces an arithmetic or logic result. "III/V compounds" (3) means polycrystalline or binary or complex monocrystalline products consisting of elements of groups IIIA and VA of Mendeleyev's periodic classification table (e.g. gallium arsenide, gallium-aluminium arsenide, indium phosphide). "Contouring control" (2) means two or more "numerically controlled" motions operating in accordance with instructions that specify the next required position and the required feed rates to that position. These feed rates are varied in relation to each other so that a desired contour is generated (ref. ISO/DIS 2806-1980). "Critical temperature" (1 3 6) (sometimes referred to as the transition temperature) of a specific "superconductive" material means the temperature at which the material loses all resistance to the flow of direct electrical current. "Cryptography" (5) means the discipline which embodies principles, means and methods for the transformation of data in order to hide its information content, prevent its undetected modification or prevent its unauthorised use. "Cryptography" is limited to the transformation of information using one or more "secret parameters" (e.g., crypto variables) or associated key management. N.B.:"secret parameter": a constant or key kept from the knowledge of others or shared only within a group.
12. "Common channel signalling" (5) is a signalling method in which a single channel between exchanges conveys, by means of labelled messages, signalling information relating to a multiplicity of circuits or calls and other information such as that used for network management. "Communications channel controller" (4) means the physical interface which controls the flow of synchronous or asynchronous digital information. It is an assembly that can be integrated into computer or telecommunications equipment to provide communications access. "Composite" (1 2 6 8 9) means a "matrix" and an additional phase or additional phases consisting of particles, whiskers, fibres or any combination thereof, present for a specific purpose or purposes. "Composite theoretical performance" ("CTP") (3 4) is a measure of computational performance given in millions of theoretical operations per second (Mtops), calculated using the aggregation of "computing elements" ("CE"). N.B.: See Category 4, Technical Note. "Compound rotary table" (2) means a table allowing the workpiece to rotate and tilt about two non-parallel axes, which can be coordinated simultaneously for "contouring control". "Computing element" ("CE") (4) means the smallest computational unit that produces an arithmetic or logic result. "Contouring control" (2) means two or more "numerically controlled" motions operating in accordance with instructions that specify the next required position and the required feed rates to that position. These feed rates are varied in relation to each other so that a desired contour is generated (ref. ISO/DIS 2806 - 1980). "Critical temperature" (1 3 6) (sometimes referred to as the transition temperature) of a specific "superconductive" material means the temperature at which the material loses all resistance to the flow of direct electrical current.
13. Position, size and numbering:3.2.6. Electronic control functionsIf the engine features electronically controlled functions, the information concerning their performance must be provided including:3.2.6.1. Make:3.2.6.2. Type:3.2.6.3. Part number:3.2.6.4. Location of engine electronic control unit:3.2.6.4.1. What does it sense:3.2.6.4.2. What does it control:Part 3 — Compression-ignition engine family3.3. Essential characteristics of the engine family3.3.1. List of engine types within a family3.3.1.1. Name of engine family:3.3.1.2. Specification of engine types within this family:Parent engineEngine typeNumber of cylindersRated speed (r/min)Fuel delivery per stroke (mm3) at rated speedRated net power (kW)Maximum torque speed (r/min)Fuel delivery per stroke (mm3) at maximum torque speedMaximum torque (Nm)Low idle speed (r/min)Cylinder swept volume as % of parent engine100 Part 4 — Engine type3.4. Essential characteristics of the engine type3.4.1. Description of the engine3.4.1.1. Manufacturer:3.4.1.2. Manufacturer’s engine code as affixed to engines:3.4.1.3. Cycle: four stroke/two stroke (1)3.4.1.4. Bore: mm3.4.1.5. Stroke: mm3.4.1.6. Number and arrangement of cylinders:3.4.1.7. Swept volume: cm33.4.1.8. Rated speed: r/min3.4.1.9. Peak torque speed: r/min3.4.1.10. Compression ratio (2):3.4.1.11. Combustion system:3.4.1.12. Drawing(s) of combustion chamber and piston crown:3.4.1.13. Minimum cross sectional area of inlet and outlet ports:3.4.1.14. Cooling system3.4.1.14.1. Coolant3.4.1.14.1.1. Nature of coolant:3.4.1.14.1.2. Circulating pump(s): yes/no (1)3.4.1.14.1.3. Characteristics or make(s) and type(s) (if applicable):3.4.1.14.1.4. Drive ratio(s) (if applicable):3.4.1.14.2. Air3.4.1.14.2.1. Blower: yes/no (1)3.4.1.14.2.2. Characteristics or make(s) and type(s) (if applicable):3.4.1.14.2.3. Drive ratio(s) (if applicable):3.4.1.15. Temperature permitted by the manufacturer:3.4.1.15.1.