Betekenis van:
brightness

Voorbeeldzinnen

1. The brightness of the sky showed that the storm had passed.
2. having a brightness of 60 % or more, and
3. Measurements shall be made with the Automatic Brightness Control function, if such a function exists, made inactive.
4. having a brightness of less than 60 %, a caliper of 254 micrometres (microns) or less and an ash content of more than 8 %.
5. ‘Correlated colour temperature’ (Tc [K]), which is temperature of a Planckian (black body) radiator whose perceived colour most closely resembles that of a given stimulus at the same brightness and under specified viewing conditions;
6. With the brightness and contrast controls at maximum, the technician shall check that, at a minimum, the white and near white gray levels can be distinguished. If white and near white gray levels cannot be distinguished, then contrast shall be adjusted until they can be distinguished.
7. Issues that could be considered include provision of a (manual or automatic) display brightness control, choice of display technology, choice of display surface texture and finish, choice of colour and gloss of surfaces being reflected in the display surface, choice of image polarity, siting of the display and adjustability, the use of a recess or cowl.
8. Input signal levels shall conform to VESA Video Signal Standard (VSIS), Version 1.0, Rev. 2.0, December 2002. With the brightness and contrast controls at maximum, the technician shall check that, at a minimum, the white and near white gray levels can be distinguished. If white and near white gray levels cannot be distinguished, then contrast shall be adjusted until they can be distinguished.
9. Television sets without forced menu: the power consumption referred to in points 1 and 2 shall be measured in the on-mode condition of the television as delivered by the manufacturer, that is, the brightness controls of the television shall be in the position adjusted by the manufacturer for the end user.
10. The power consumption referred to in points 1 and 2 shall be measured in the on-mode condition of the television as delivered by the manufacturer, that is, the brightness controls of the television monitor shall be in the position adjusted by the manufacturer for the end user.
11. Issues that could be considered include provision of a (manual or automatic) display brightness control, choice of display technology, choice of display surface texture and finish, choice of colour and gloss of surfaces being reflected in the display surface, choice of image polarity, sighting of the display and adjustability, the use of a recess or cowl.
12. Corresponding voltage values for digital only interface monitors that correspond to the brightness of the image (0 to 0,7 volt) are:0 volt (black) = a setting of 00,1 volt (darkest shade of gray analogue) = 36 digital gray0,7 volt (full white analogue) = 255 digital grayPlease note that future digital interface specifications may widen this range, but in all cases, 0 volt shall correspond to black and the maximum value shall correspond to white, with 0,1 volt corresponding to one-seventh of the maximum value.